Double Crimp Screen are produced by weaving previously crimped wires into one another. The mesh width and wire diameter determine the number of crimps within a mesh width.
Material: highly abrasion-resistant spring steel or stainless spring steel.
Opening size: 2.0 - 80.0 mm
Wire diameter: 0.8 - 8 mm
Supplied dimensions: as required by customer, in rolls or formats.
Installation instructions:
The screen is installed with using of tensioning metallic bars into a separator over different types of hook strips, further with using of side bars and wedges, possibly is fastened into a frame.
Double Crimp Screen has the wires pre-undulated with strict steps so as to get regularity within the mesh.
Due to its high per centage of screening surface, they're wont to classify, with nice exactness and a high performance, materials that don't have a bent to dam.
The high resistance to traction of the steel used permits getting a good resistance to vibration and a protracted servicetime.
1. Varied lengths
2. Require less maintenance
3. Sturdy construction
Mainly used in coal mines, construction and different industries. For example: Safety grids (e.g. car industry, mechanical engineering, building industry), filling elements for gates and fences in buildings and gardens, booth construction, plant breeding, Pigeon barriers, noise protection, etc., some galvanized crimped metal Wire mesh and non-contaminating crimped wire mesh square measures for cooking flour food and meat. Jointly referred to as "up and down", this weave is typically used for screening operations with smaller openings. Medium and heavy duty wires for the relevant screen gap size, square screens for house screens and ten grids, and coarser square dimensions are usually flat braided crimp wires.
Message to this supplier
+86-318-8068822
